Icom IP100H Instruction Manual ver. 2.30 - Page 37

2 SETTING UP THE IP1000C SYSTEM 3. Bridge connection and Caller settings Bridge connection Extension number 2001 IP1000C 192.168.0.1 IP100H Sales1 00001 Seles group1 00011 Wireless access point Sales2 00002 VE-PG3 (RoIP Gateway) 192.168.0.2 IP phone Extension number 500 About the VE-PG3 settings (Converter mode) 5. Enter the extension number of the [Bridge 1] port in the [Extension] field. (Example: 2001) [Extension Connect] (menu) > [Extension Connect] (screen) > [Extension] (field) The "Port Type" item must be set to the same port as the one set in step 1. 6. Enter the extension number of the IP phone in the [Extension] field. (Example: 500) [Extension Connect] (menu) > [Extension Connect] (screen) > [Extension] (field) Enter the IP phone's MAC address When the IP phone calls the number "2001," all the IP100Hs of sales group "00011" will be called. ••The caller number on the IP100H's display will be the extension number of the IP phone. (Example: 500) When the IP phone calls the number "011" + "00001," only the IP100H of Sales 1 "00001" will be called. ••The numbers "011" and "00001" are individual numbers for the [Bridge 1] port and Sales 1. ••The caller number on the IP100H's display will be the extension number of the IP phone. (Example: 500) See the VE-PG3 instruction manual for the setting details. When the IP100H (example: Sales 2 "00002") calls the IP phone: 1. Display the IP phone's Destination phone number on the IP100H's screen. ••The Destination phone number of the IP phone must be programmed in the IP100H's ID list. 2. Hold down [PTT] for more than 1 second. ••The caller number on the IP phone's display will be the individual number of Sales 2. (Example: "011" + "00002") See the IP100H instruction manual for the operating details. 2-18