Icom IP100H Instruction Manual ver. 2.30 - Page 149
Destination Setting, Click to restore the settings.
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
4 ABOUT THE SETTING SCREEN 10. [Destination Settings] Menu ■■Destination Setting Call Type: All [Destination Settings]-[Destination Setting] 1 2 3 45 (These are examples when clicking on the [List of Destination Setting Entries (All Call)] field.) 3 Additional Controller �� Select Additional Controller when configuring several controllers, and the All call calls between the different controllers. LLBy clicking the [All] box, you can select or cancel all entries in the list. LLIf [Sub] is selected on the [Controller Mode] item in the [RoIP Settings] screen, select the Additional controller on this setting as shown below. 4
4
ABOUT THE SETTING SCREEN
4-95
10. [Destination Settings] Menu
[Destination Settings]–[Destination Setting]
■
Destination Setting
Call Type: All
(These are examples when clicking <Edit> on the [List of Destination Setting Entries (All Call)] field.)
1
2
3
4
5
3
Additional Controller ��
Select Additional Controller when configuring several controllers, and
the All call calls between the different controllers.
L
By clicking the [All] box, you can select or cancel all entries in the list.
L
If [Sub] is selected on the [Controller Mode] item in the [RoIP Settings]
screen, select the Additional controller on this setting as shown below.
4
<Apply> ��������
Click to apply the entries.
5
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.