Icom IP100H Instruction Manual ver. 2.30 - Page 200

Enter the Destination ID/Phone Number in the ID List item on the [ID List] screen.

Get Icom IP100H PDF manuals and user guides View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 200 highlights

6 FOR YOUR INFORMATION 1. Trouble shooting The IP100H displays the "Out of range" icon or "Connecting..." ••The distance between the IP100H and its wireless access point is too far. - Move closer to the access point. ••The wireless access point does not turn ON. - Turn ON the access point. ••The wireless LAN setting of the IP100H does not match the access point's. - Check the wireless LAN settings of the access point. - Using the cloning software CS-IP100H, check and modify the wireless LAN settings of the IP100H. ••In the 5 GHz band operation, the stealth SSID is set to ON, or the SSID Broadcast is set to OFF in the access point. - Set the stealth SSID to OFF, or set the SSID Broadcast to ON. The IP100H displays "Setting Error..." (When the IP100H displays "In the range" icon.) ••The provisioning server settings of the IP100H are different than the connected the IP1000C. - Using the cloning software CS-IP100H, check and modify the provisioning server settings. - In the IP1000C software, check and modify the provisioning server settings of the IP100H. ••The IP1000C does not connect to the network. - Check the connections between the IP1000C or Hub and check the LAN cables. The IP100H cannot communicate with any other devices ••The setting of the Individual ID or Group ID is incorrect. - Enter the correct Individual ID or Group ID. ••The Individual ID or Group ID is not registered on the ID list. - Enter the "Destination ID/Phone Number" in the "ID List" item on the [ID List] screen. - When using the RoIP gateway VE-PG3, check the bridge connection with the VE-PG3. The IP100H cannot use the Area call function ••The function setting of the Area Call is set to "Disable." - Set the "Area Call" item in the Transceiver Settings screen. (p. 4-44) - Reboot the IP100H and get the setting from the IP1000C. - Push [FUNC] on the IP100H's front panel, then turn ON the "Area Call" function. ••The wireless access point that the IP100H connects to in the Area Call, is not set. - Enter the "Area Setting" item in the [Area Call] screen. (p. 4-29) 6-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
6
FOR YOUR INFORMATION
6-3
1. Trouble shooting
The IP100H displays the “Out of range” icon or “Connecting...”
•
The distance between the IP100H and its wireless access point is too far.
- Move closer to the access point.
•
The wireless access point does not turn ON.
- Turn ON the access point.
•
The wireless LAN setting of the IP100H does not match the access point’s.
- Check the wireless LAN settings of the access point.
- Using the cloning software CS-IP100H, check and modify the wireless LAN settings of the IP100H.
•
In the 5 GHz band operation, the stealth SSID is set to ON, or the SSID Broadcast is set to OFF in the
access point.
- Set the stealth SSID to OFF, or set the SSID Broadcast to ON.
The IP100H displays “Setting Error...”
(When the IP100H displays “In the range” icon.)
•
The provisioning server settings of the IP100H are different than the connected the IP1000C.
- Using the cloning software CS-IP100H, check and modify the provisioning server settings.
- In the IP1000C software, check and modify the provisioning server settings of the IP100H.
•
The IP1000C does not connect to the network.
- Check the connections between the IP1000C or Hub and check the LAN cables.
The IP100H cannot communicate with any other devices
•
The setting of the Individual ID or Group ID is incorrect.
- Enter the correct Individual ID or Group ID.
•
The Individual ID or Group ID is not registered on the ID list.
- Enter the “Destination ID/Phone Number” in the “ID List” item on the [ID List] screen.
- When using the RoIP gateway VE-PG3, check the bridge connection with the VE-PG3.
The IP100H cannot use the Area call function
•
The function setting of the Area Call is set to “Disable.”
- Set the “Area Call” item in the Transceiver Settings screen. (p. 4-44)
- Reboot the IP100H and get the setting from the IP1000C.
- Push [FUNC] on the IP100H’s front panel, then turn ON the “Area Call” function.
•
The wireless access point that the IP100H connects to in the Area Call, is not set.
- Enter the “Area Setting” item in the [Area Call] screen. (p. 4-29)