Intel BB5520UR Product Specification - Page 109

Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS BIOS Setup Utility Main Advanced Security Assert NMI on SERR Assert NMI on PERR Resume on AC Power Loss Clear System Event Log FRB-2 Enable O/S Boot Watchdog Timer O/S Boot Watchdog Timer Policy O/S Boot Watchdog Timer Timeout ACPI 1.0 Support Plug & Play BMC Detection ► Console Redirection ► System Information Server Management Boot Options Boot Manager Enabled/Disabled Enabled/Disabled Stay Off/Last state/Reset Enabled/Disabled Enabled/Disabled Enabled/Disabled Power off/Reset 5 minutes/10 minutes/15 minutes/20 minutes Enabled/Disabled Enabled/Disabled Figure 39. Setup Utility - Server Management Configuration Screen Display Table 32. Setup Utility - Server Management Configuration Screen Fields Setup Item Assert NMI on SERR Options Enabled Disabled Assert NMI on PERR Enabled Disabled Resume on AC Power Loss Stay Off Last state Reset Clear System Event Log Enabled Disabled FRB-2 Enable Enabled Disabled Help Text On SERR, generate an NMI and log an error. Note: [Enabled] must be selected for the Assert NMI on PERR setup option to be visible. On PERR, generate an NMI and log an error. Note: This option is only active if the Assert NMI on SERR option is [Enabled] selected. System action to take on AC power loss recovery. [Stay Off] - System stays off. [Last State] - System returns to the same state before the AC power loss. [Reset] - System powers on. If enabled, clears the System Event Log. All current entries will be lost. Note: This option is reset to [Disabled] after a reboot. Fault Resilient Boot (FRB). If enabled, the BIOS programs the BMC watchdog timer for approximately 6 minutes. If the BIOS does not complete POST before the timer expires, the BMC resets the system. Comments Revision 1.8 95 Intel order number E39529-013