Intel BB5520UR Product Specification - Page 63

Serial Ports, Floppy Disk Controller, Keyboard and Mouse Support, Video Support

Get Intel BB5520UR PDF manuals and user guides View all Intel BB5520UR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS Functional Architecture 3.8 Serial Ports The Intel® Server Boards S5520HC, S5500HCV and S5520HCT provide two serial ports: an external DB9 serial port and an internal DH-10 serial header. The rear DB9 serial A port is a fully-functional serial port that can support any standard serial device. Serial B is an optional port accessible through a 9-pin internal DH-10 header. You can use a standard DH-10 to DB9 cable to direct serial B to the rear of a chassis. The serial B interface follows the standard RS232 pin-out as defined in the following table. Table 13. Serial B Header Pin-out Pin 1 2 3 4 5 6 7 8 9 DCD DSR RX RTS TX CTS DTR RI GND Signal Name Serial Port B Header Pin-out 3.9 Floppy Disk Controller The Intel® Server Boards S5520HC, S5500HCV and S5520HCT do not support a floppy disk controller interface. However, the system BIOS recognizes USB floppy devices. 3.10 Keyboard and Mouse Support The Intel® Server Boards S5520HC, S5500HCV and S5520HCT do not support PS/2* interface keyboards and mice. However, the system BIOS recognizes USB Specification-compliant keyboards and mice. 3.11 Video Support The Intel® Server Boards S5520HC, S5500HCV and S5520HCT integrated BMC include a 2D SVGA video controller and 8 MB video memory. The 2D SVGA subsystem supports a variety of modes, up to 1024 x 768 resolution in 8/16/24/32 bpp. It also supports both CRT and LCD monitors with up to an 85-Hz vertical refresh rate. Video is accessed using a standard 15-pin VGA connector found on the back edge of the server boards. You can disable the onboard video controller using the BIOS Setup Utility or when an add-in video card is detected. The system BIOS provides the option for Dual Monitor Video operation when an add-in video card is configured in the system. 3.11.1 Video Modes The integrated video controller supports all standard IBM* VGA modes. The following table shows the 2D modes supported for both CRT and LCD. Revision 1.8 49 Intel order number E39529-013

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS
Functional Architecture
Revision 1.8
Intel order number E39529-013
49
3.8
Serial Ports
The Intel
®
Server Boards S5520HC, S5500HCV and S5520HCT provide two serial ports: an
external DB9 serial port and an internal DH-10 serial header. The rear DB9 serial A port is a
fully-functional serial port that can support any standard serial device.
Serial B is an optional port accessible through a 9-pin internal DH-10 header. You can use a
standard DH-10 to DB9 cable to direct serial B to the rear of a chassis. The serial B interface
follows the standard RS232 pin-out as defined in the following table.
Table 13. Serial B Header Pin-out
Pin
Signal Name
Serial Port B Header Pin-out
1
DCD
2
DSR
3
RX
4
RTS
5
TX
6
CTS
7
DTR
8
RI
9
GND
3.9
Floppy Disk Controller
The Intel
®
Server Boards S5520HC, S5500HCV and S5520HCT do not support a floppy disk
controller interface. However, the system BIOS recognizes USB floppy devices.
3.10
Keyboard and Mouse Support
The Intel
®
Server Boards S5520HC, S5500HCV and S5520HCT do not support PS/2* interface
keyboards and mice. However, the system BIOS recognizes USB Specification-compliant
keyboards and mice.
3.11
Video Support
The Intel
®
Server Boards S5520HC, S5500HCV and S5520HCT integrated BMC include a 2D
SVGA video controller and 8 MB video memory.
The 2D SVGA subsystem supports a variety of modes, up to 1024 x 768 resolution in
8/16/24/32 bpp. It also supports both CRT and LCD monitors with up to an 85-Hz vertical
refresh rate
.
Video is accessed using a standard 15-pin VGA connector found on the back edge of the server
boards. You can disable the onboard video controller using the BIOS Setup Utility or when an
add-in video card is detected. The system BIOS provides the option for Dual Monitor Video
operation when an add-in video card is configured in the system.
3.11.1
Video Modes
The integrated video controller supports all standard IBM* VGA modes. The following table
shows the 2D modes supported for both CRT and LCD.