Intel BB5520UR Product Specification - Page 17

Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS Overview Feature Add-in Card Slots Description • Intel® Server Board S5520HC/S5520HCT: Six expansion slots ƒ One full-length/full-height PCI Express* Gen2 slot (x16 Mechanically, x8 Electrically) ƒ Three full-length/full-height PCI Express* Gen2 x8 slots ƒ One full-length/full-height PCI Express* Gen1 slot (x8 Mechanically, x4 Electrically) shared with SAS Module slot*. ƒ One 32-bit/33 MHz PCI slot, keying for 5-V and Universal PCI add-in card Hard Drive and Optical Drive Support RAID Support USB Drive Support I/O control support Video Support LAN Security** • Intel® Server Board S5500HCV: Five expansion slots ƒ One full-length/full-height PCI Express* Gen2 slot (x16 Mechanically, x4 Electrically) ƒ Two full-length/full-height PCI Express* Express* Gen2 x8 slots ƒ One full-length/full-height PCI Express* Gen1 slot (x8 Mechanically, x4 Electrically) shared with SAS Module slot*. ƒ One 32-bit/33 MHz PCI slot, keying for 5-volt and Universal PCI add-in card • Optical devices are supported • Six SATA connectors at 1.5 Gbps and 3 Gbps • Four SAS connectors at 3 Gbps through optional Intel® SAS Entry RAID Module AXX4SASMOD • Intel® Embedded Server RAID Technology II through onboard SATA connectors provides SATA RAID 0, 1, and 10 with optional RAID 5 support provided by the Intel® RAID Activation Key AXXRAKSW5 • Intel® Embedded Server RAID Technology II through optional Intel® SAS Entry RAID Module AXX4SASMOD provides SAS RAID 0, 1, and 10 with optional RAID 5 support provided by the Intel® RAID Activation Key AXXRAKSW5 • IT/IR RAID through optional Intel® SAS Entry RAID Module AXX4SASMOD provides entrylevel hardware RAID 0, 1, 10/10E, and native SAS pass through mode • 4 ports full featured SAS/SATA hardware RAID through optional Intel® Integrated RAID Module SROMBSASMR (AXXROMBSASMR), provides RAID 0, 1, 5, 6 and striping capability for spans 10, 50, 60. • One internal type A USB port with USB 2.0 support that supports a peripheral, such as a floppy drive • One internal low-profile USB port for USB Solid State Drive • External connections: ƒ DB9 serial port A connection ƒ One DH 10 serial port connector (optional) ƒ Two RJ-45 NIC connectors for 10/100/1000 Mb connections: Dual GbE through the Intel® 82575EB Network Connection. ƒ Four USB 2.0 ports at the back of the board • Internal connections: ƒ Two 9-pin USB headers, each supports two USB 2.0 ports ƒ One DH10 serial port B header ƒ Six SATA connectors at 1.5 Gbps and 3 Gbps ƒ Four SAS connectors at 3 Gbps (optional) ƒ One SSI-compliant 24-pin front control panel header • ServerEngines* LLC Pilot II* with 64 MB DDR2 memory, 8 MB allocated to graphics ƒ Integrated 2D video controller ƒ Dual monitor video mode is supported • Two Gigabit through Intel® 82575EB PHYs with Intel® I/O Acceleration Technology 2 support • Trusted Platform Module Revision 1.8 3 Intel order number E39529-013