Intermec PM23c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 118
Replace the Platen Roller
View all Intermec PM23c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Chapter 6 - Maintain the Printer 8 Replace the media (and ribbon) in the printer. 9 Turn the printhead lift lever clockwise to lower it. 10 Close the media cover, reconnect power, and turn on the printer. Replace the Platen Roller If the printer platen roller gets damaged or wears out, it is easy to replace. On the PM43 printer, you can store a spare platen roller in the holder located under the media holder. Just insert the platen roller as you would into the printer and then turn the latch counterclockwise to secure it to the printer base. 1 Turn the printer off and disconnect the printer from power. 2 Open the media cover. 3 Remove the media. 4 Turn the printhead lift lever counterclockwise to raise the printhead. 5 Rotate the platen roller latch clockwise to detach it from the printer and pull the platen roller away from the printer. 104 PM23c, PM43, and PM43c Mid-Range Printer User Manual