Intermec PM23c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 144
Wireless 802.11 General Settings, Settings > Communications, > Wireless 802.11 > General
View all Intermec PM23c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Appendix B - Default Settings Ethernet Settings (Continued) Setting Description Default Default Router Specifies the IP address of a router that 0.0.0.0 is used when a device sends a packet to another subnet or to an unknown destination. DHCP Response Specifies if the printer receives DHCP Broadcast responses by broadcast or unicast. (IPv6) IP Assignment Method Specifies how the printer obtains an IP Automatic address (for IPv6 networks). (IPv6) IP Address Specifies the unique network-level Automatic address that is assigned to each device in a TCP/IP network (IPv6). Wireless 802.11 General Settings This section describes the 802.11 general settings. To view these settings: • From the printer Main Menu, select Settings > Communications > Wireless 802.11 > General. • From the printer web page, click the Configure tab, Communications > Wireless 802.11. Wireless 802.11 General Settings Setting Description Default Network Defines the wireless network. To Name (SSID) communicate, all access points and wireless devices must have the same network name, which is case-sensitive. INTERMEC Network Type Selects the radio behavior of the printer. Ad Infrastructure Hoc mode allows the printer to communicate directly with another printer. Infrastructure mode allows the printer to communicate through an access point. Roaming Controls the roaming inclination of the Off printer. The higher the level, the less inclined the printer is to switch access points based on the printer received signal strength (RSSI). 130 PM23c, PM43, and PM43c Mid-Range Printer User Manual