Intermec PM23c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 34

Chapter 1 - About the Printer PM23c, PM43, and PM43c Options and Accessories Option or Accessory 1-inch Hanger Supported Printer PM23c Airline Boarding Pass PM43c Airline Baggage Tag PM23c, PM43c Door with Bubble Top PM23c Collapsible Core PM43, PM43c Cutter PM43, PM43c Cutter Tray PM43, PM43c Door with the Dome PM23c, Cover PM43c Dual USB Host Port Board DUART Board Extended Base with Full Label Roll Rewinder Industrial Interface+UART board PM23c, PM43, PM43c PM23c, PM43, PM43c PM43 PM23c, PM43, PM43c Description Use the 1-inch hanger when you are using very narrow media. Use the airline boarding pass option to print boarding passes from fanfold media. The airline boarding pass options include a ticket shelf, media guides, and an extended tray. Use the airline media guides and filler to easily load baggage tags in your printer. Use the bubble door when printing baggage tags on a roll and you need to have media fully covered. Use the collapsible core accessory to easily remove ribbon from the takeup hub. Use the cutter option to cut media into individual labels. Use the optional cutter tray accessory to collect the cut-off labels. Use the dome cover to accommodate rolls of media up to 212.725 mm (8.375 inch) outside diameter and protect the inside of the printer from dust and debris. Use the dual USB host port board to add the ability to connect multiple USB devices to the printer. Use the DUART board to add two UART ports on the back of the printer. Use the extended base option with the PM43 printer to be able to rewind a full roll of labels. Use the Industrial interface + UART board to make a UART port on the back of the printer. 20 PM23c, PM43, and PM43 Mid-Range Printer User Manual