Intermec PM23c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 150
Media Settings
View all Intermec PM23c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Appendix B - Default Settings Media Settings This section describes media settings for the printer. To view these settings: • From the printer Main Menu, select Settings > Printing > Media. • From the printer web page, click the Configure tab, Printing > Media. Note: If you are using an icon printer that is not on a network, you need to use PrintSet 5 through a USB connection to configure media settings. Media Settings Setting Description Default Media Type Selects the type of media that is loaded in Media With the printer. Gaps Print Method Selects the method of printing that the printer is using. Ribbon (TTR) for thermal transfer printers, or No Ribbon (DT) for direct thermal printers Media Margin Sets the width of the margin from the left Variable (X) edge of the label along the printhead to the edge of the printable area. Unit of measurement is defined in the Unit of Measurement parameter. .FEJB NBSHJO 9 *935-044-001* INTERMEC 6001 36th Ave W 136 PM23c, PM43, and PM43c Mid-Range Printer User Manual