Intermec PM23c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 121
Adjust the Printhead Pressure, your labels are printing ligher on one side than the other.
View all Intermec PM23c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 6 - Maintain the Printer 4 Press down on the blue part of the printhead balance bar and move it: • outward for wider media. • inward for narrower media. 5 Close the printhead and load the ribbon. 6 Test and readjust the printhead balance if necessary. 7 Close the media cover. Adjust the Printhead Pressure You may need to adjust the printhead pressure on the printer if: • you are using thicker or thinner media than previously. • your labels are printing ligher on one side than the other. • your thermal transfer ribbon starts to crease. Do not use a higher printhead pressure than necessary. It may increase the wear on the printhead and shorten its life. 1 Open the media cover. PM23c, PM43, and PM43c Mid-Range Printer User Manual 107
Chapter 6 — Maintain the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual
107
4
Press down on the blue part of the printhead balance bar and move
it:
•
outward for wider media.
•
inward for narrower media.
5
Close the printhead and load the ribbon.
6
Test and readjust the printhead balance if necessary.
7
Close the media cover.
Adjust the Printhead Pressure
You may need to adjust the printhead pressure on the printer if:
•
you are using thicker or thinner media than previously.
•
your labels are printing ligher on one side than the other.
•
your thermal transfer ribbon starts to crease.
Do not use a higher printhead pressure than necessary. It may increase
the wear on the printhead and shorten its life.
1
Open the media cover.