Intermec PM23c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 46
About Cut-Off Printing
View all Intermec PM23c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 2 - Set Up the Printer 3 Feed media through the slot in the back of the printer (or from the slot in the bottom of the printer) and route it through the print mechanism. 4 Turn the printhead lift lever clockwise to close the printhead. 5 Close the media cover. 6 Press the Print button to advance the media. 7 Configure the printer for the correct media type (media with gaps, black mark, continuous fixed length, or continuous variable length). 8 Calibrate the sensors on the printer. You can calibrate the media from the Main Menu (Wizards > Calibration > Media) on a full touch printer or from the web page (Services > Media Calibration) for all models of the printer. About Cut-Off Printing In cut-off printing, each label is automatically cut from the media roll immediately after the label is printed. You can print on non-adhesive, continuous label stock. You can also use self-adhesive labels with a liner, but you must cut only the liner. 32 PM23c, PM43, and PM43c Mid-Range Printer User Manual