Intermec PM23c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 45
Load Media from an External Supply
View all Intermec PM23c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 2 - Set Up the Printer 8 Turn the printhead liftlever clockwise to close the printhead. 9 Close the media cover. 10 Press the Print button to advance the media. 11 Configure the printer for the correct media type (media with gaps, black mark, continuous fixed length, or continuous variable length). 12 Calibrate the sensors on the printer. You can calibrate the media from the Main Menu (Wizards > Calibration > Media) on a full touch printer or from the web page (Services > Media Calibration) for all models of the printer. Load Media from an External Supply You can place the media supply, such as fanfold tickets or tags, behind the printer or underneath it. 1 Open the media cover. 2 Turn the printhead lift lever counterclockwise to raise the printhead. PM23c, PM43, and PM43c Mid-Range Printer User Manual 31