Lenovo ThinkPad T540p (English) User Guide - Page 149

: Detection error on HDD1 Ultrabay HDD., 2110: Read error on HDD0 Main HDD.

Page 149 highlights

Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setup to check security settings, Press F10 and then press Enter to restart the system. If you still have a problem, have the computer serviced. • Message: 0187: EAIA data access error. Solution: The access to EEPROM is failed. Have the computer serviced. • Message: 0188: Invalid RFID Serialization Information Area. Solution: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced, and the box serial number needs to be reinstalled. Have the computer serviced. • Message: 0189: Invalid RFID configuration information area. Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replaced, and the UUID needs to be reinstalled. Have the computer serviced. • Message: 0190: Critical low-battery error. Solution: The computer turns off, because the battery is low. Connect the ac power adapter to the computer and charge the battery, or replace the battery with a fully charged one. • Message: 0191: System Security - Invalid remote change requested. Solution: The system configuration change has failed. Confirm the operation and try again. To clear the error, enter the ThinkPad Setup program. • Message: 0199: System Security - Security password retry count exceeded. Solution: This message is displayed if you enter a wrong supervisor password more than three times. Confirm the supervisor password and try again. To clear the error, enter the ThinkPad Setup program. • Message: 1802: Unauthorized network card is plugged in. Solution: The network card is not supported on this computer. Remove it. • Message: 1820: More than one external fingerprint readers are attached. Solution: Power off and remove all but the reader that you set up within your main operating system. • Message: 2100: Detection error on HDD0 (Main HDD). Solution: The hard disk drive is not working. Have the hard disk drive serviced. • Message: 2101: Detection error on HDD1 (Ultrabay HDD)). Solution: The hard disk drive is not working. Have the hard disk drive serviced. • Message: 2102: Detection error on SSD2 (M.2) Solution: The M.2 SSD device is not working. Have the M.2 SSD device serviced. • Message: 2110: Read error on HDD0 (Main HDD). Solution: The hard disk drive is not working. Have the hard disk drive serviced. • Message: 2111: Read error on HDD1 (Ultrabay HDD) Solution: The hard disk drive is not working. Have the hard disk drive serviced. • Message: 2112: Read error on SSD2 (M.2) Solution: The M.2 SSD device is not working. Have the M.2 SSD device serviced. Chapter 10. Troubleshooting computer problems 133

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186

Solution
: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setup
to check security settings, Press F10 and then press Enter to restart the system. If you still have a
problem, have the computer serviced.
Message
: 0187: EAIA data access error.
Solution
: The access to EEPROM is failed. Have the computer serviced.
Message
: 0188: Invalid RFID Serialization Information Area.
Solution
: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced,
and the box serial number needs to be reinstalled. Have the computer serviced.
Message
: 0189: Invalid RFID configuration information area.
Solution
: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replaced,
and the UUID needs to be reinstalled. Have the computer serviced.
Message
: 0190: Critical low-battery error.
Solution
: The computer turns off, because the battery is low. Connect the ac power adapter to the
computer and charge the battery, or replace the battery with a fully charged one.
Message
: 0191: System Security - Invalid remote change requested.
Solution
: The system configuration change has failed. Confirm the operation and try again. To clear the
error, enter the ThinkPad Setup program.
Message
: 0199: System Security - Security password retry count exceeded.
Solution
: This message is displayed if you enter a wrong supervisor password more than three times.
Confirm the supervisor password and try again. To clear the error, enter the ThinkPad Setup program.
Message
: 1802: Unauthorized network card is plugged in.
Solution
: The network card is not supported on this computer. Remove it.
Message
: 1820: More than one external fingerprint readers are attached.
Solution
: Power off and remove all but the reader that you set up within your main operating system.
Message
: 2100: Detection error on HDD0 (Main HDD).
Solution
: The hard disk drive is not working. Have the hard disk drive serviced.
Message
: 2101: Detection error on HDD1 (Ultrabay HDD)).
Solution
: The hard disk drive is not working. Have the hard disk drive serviced.
Message
: 2102: Detection error on SSD2 (M.2)
Solution
: The M.2 SSD device is not working. Have the M.2 SSD device serviced.
Message
: 2110: Read error on HDD0 (Main HDD).
Solution
: The hard disk drive is not working. Have the hard disk drive serviced.
Message
: 2111: Read error on HDD1 (Ultrabay HDD)
Solution
: The hard disk drive is not working. Have the hard disk drive serviced.
Message
: 2112: Read error on SSD2 (M.2)
Solution
: The M.2 SSD device is not working. Have the M.2 SSD device serviced.
Chapter 10
.
Troubleshooting computer problems
133