Lenovo ThinkPad i Series 1124 ThinkPad 240 User's Reference that shipped with - Page 114

PC Card problems, Refer to Resolving System Resource Conflicts in the Online User's Guide.

Page 114 highlights

Troubleshooting charts PC Card problems Problem The PC Card shows "Ready", but it does not work correctly. A system resource conflict occurred when a PC Card was used. The system cannot start from the PC Card. The system does not recognize your PC Card. The PC Card is recognized by the system, but the "Not Ready" or "Not Configured" message is shown. Action Make sure that: The system resources reserved for the PC Card do not conflict with other system devices. Refer to "Resolving System Resource Conflicts" in the Online User's Guide. The resources reserved for the PC Card match the settings in the application program. If you are using a network card, check the I/O port address, IRQ level, and memory window address. See "Resolving System Resource Conflicts" in the Online User's Guide. Make sure that the correct system resources are being used for the PC Card. Make sure that: If the PC Card is not a modem, a Flash, or an SRAM card, you have the proper client device driver for the card. In Windows 98 and Windows 95, the PC Card must have an INF file associated with it. Your PC Card supports PCMCIA Release 2.0, 2.01, and 2.10. Refer to the manual that came with your PC Card. If your PC Card does not support those releases of PCMCIA, you cannot use the card with the system. Contact your PC Card supplier. Your PC Card is working by following the diagnostic instructions for your PC Card, if any. Make sure that: If the PC Card is not a modem, a Flash, or an SRAM card, you have the proper client device driver for the card. In Windows 98 and Windows 95, the PC Card must have an INF file associated with it. The resources for the PC Card are correctly reserved. Refer to "Resolving System Resource Conflicts" in the Online User's Guide. 102 ThinkPad 240 User's Reference

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170

Troubleshooting charts
PC Card problems
Problem
Action
The PC Card shows
"Ready", but it does not
work correctly.
Make sure that:
±
The system resources reserved for the PC Card do not conflict with other
system devices.
±
Refer to "Resolving System Resource Conflicts" in the Online User's Guide.
±
The resources reserved for the PC Card match the settings in the application
program.
±
If you are using a network card, check the I/O port address, IRQ level, and
memory window address.
A system resource con-
flict occurred when a PC
Card was used.
See "Resolving System Resource Conflicts" in the Online User's Guide.
The system cannot start
from the PC Card.
Make sure that the correct system resources are being used for the PC Card.
The system does not
recognize your PC Card.
Make sure that:
±
If the PC Card is not a modem, a Flash, or an SRAM card, you have the
proper client device driver for the card. In Windows 98 and Windows 95, the
PC Card must have an INF file associated with it.
±
Your PC Card supports PCMCIA Release 2.0, 2.01, and 2.10. Refer to the
manual that came with your PC Card. If your PC Card does not support those
releases of PCMCIA, you cannot use the card with the system. Contact your
PC Card supplier.
±
Your PC Card is working by following the diagnostic instructions for your PC
Card, if any.
The PC Card is recog-
nized by the system, but
the "Not Ready" or "Not
Configured" message is
shown.
Make sure that:
±
If the PC Card is not a modem, a Flash, or an SRAM card, you have the
proper client device driver for the card. In Windows 98 and Windows 95, the
PC Card must have an INF file associated with it.
±
The resources for the PC Card are correctly reserved. Refer to "Resolving
System Resource Conflicts" in the Online User's Guide.
102
ThinkPad 240 User's Reference