Lexmark 44J0000 User's Guide - Page 69
s & Press Go, Install Tray x
UPC - 734646207737
View all Lexmark 44J0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Message:Check MPF Connection Either the multipurpose feeder has been removed from the printer, or it is attached but not completely connected. If you are not using the multipurpose feeder, press Go to clear the message. If you are using the multipurpose feeder, reattach it. Message:Insert Duplex Pages & Press Go The front side of the manual duplex job is printed. Remove the pages and reinsert them face up in tray 1 to print the other side. Message:Insert The tray is not in the printer. Reinsert the tray to clear the message. Message:Install Tray x or Cancel Job The tray was removed before a job sent to that tray printed. Reinsert the tray or press Menu> and select Cancel Job. Message:Load The tray is out of paper. Load paper to clear the message. Message:Load Manual The manual feeder or multipurpose feeder is waiting to print a manual feed job. Load a sheet of paper or an envelope. If a sheet or envelope is already in the manual feeder or multipurpose feeder, press Go to clear the message. Message:34 Short Paper The wrong size paper is selected in the Paper Size menu. Select the correct size and press Go to clear the message, or press Menu> and select Cancel Job. PerfectFinish Message: 87 PerfectFinish Empty The PerfectFinish cartridge is empty and must be replaced. To continue printing your job without PerfectFinish, press Go to clear the message. Message: Printer Calibrating This message appears whenever the PerfectFinish cartridge applicator is refilling. You may hear some clicking sounds as the cartridge applicator refills. Once the cartridge applicator is refilled, you may resume printing. 60