Lexmark C912 User's Reference - Page 100
Understanding printer messages, Close Side Door - transfer belt
View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Understanding printer messages Message Check Connection Clearing Job Accounting Stat Close Front Door Close Side Door Close Top Door Close Tray Top Cover Copying Defragmenting Delete All Jobs Deleting Jobs Did You Replace Belt? What this message means What you can do The specified device is either not fully connected to the printer or is experiencing a hardware failure. • Reestablish communication by removing the specified device and reattaching it to the printer. • Press Go to clear the message and continue printing. • If a hardware failure, turn the printer off and back on. If the error recurs, turn the printer off, remove the specified device, and call for service. The printer is deleting all job Wait for the message to clear. statistics stored on the hard disk. The printer front door is open. Close the printer front door to clear the message. The printer side door is open. Close the printer side door to clear the message. The printer top door is open. Close the printer top door to clear the message. The high capacity feeder door is open. Note: The high capacity feeder can only be installed as Tray 3 or Tray 5. Close the top cover to clear the message. The printer is processing a copy Wait for the message to clear. job originating from the scanner. The printer is defragmenting the flash memory to reclaim storage space occupied by deleted resources. Wait for the message to clear. Warning: Do not turn the printer off while this message is displayed. The printer is requesting confirmation to delete all held jobs. • Press Go to continue. The printer deletes all held jobs. • Press Stop to cancel the operation The printer is deleting one or more held jobs. Wait for the message to clear. You have turned on the printer while the transfer belt is in the warning state and needs to be replaced. • Press Select to reset the transfer belt maintenance counter. • Press Stop to continue. The message continues to appear each time you turn the printer on while the transfer belt is in the warning state. Understanding printer messages 95