Lexmark C912 User's Reference - Page 57

Using printer menus Menu Item Toner Darkness Purpose To lighten or darken printed output, or conserve toner. Note: Setting Toner Darkness to values of 1, 2, or 3 is only effective when using the PostScript driver. Values 5 4* 3 2 1 If Print Mode is Black & White, a setting of 5 increases toner density and darkness to all print jobs (PCL or PostScript). If Print Mode is Color, a setting of 5 is the same as 4. Default toner darkness setting. Reduction in toner consumption. Further reduction in toner consumption. Maximum reduction in toner consumption. Finishing Menu Use the Finishing Menu to define how the printer delivers the printed output. Note: Values marked by an asterisk (*) are the factory default settings. Menu Item Blank Pages Collation Copies Purpose Values To specify whether to include program-generated blank pages as part of your printed output. Do Not Print* Does not print program-generated blank pages as part of your job. Print Prints program-generated blank pages as part of your job. To keep the pages of a print job Off* stacked in sequence when printing multiple copies of the job. Prints each page of a job the number of times specified by the Copies menu item. For example, if you set Copies to 2 and send three pages to print, the printer prints page 1, page 1, page 2, page 2, page 3, page 3. On Prints entire job the number of times specified by the Copies menu item. For example, if you set Copies to 2 and send three pages to print, the printer prints page 1, page 2, page 3, page 1, page 2, page 3. To set the number of copies you want for the printer default value. (Set the number of copies required for a specific job from the printer driver. Values selected from the printer driver always override values selected from the operator panel.) 1...999 (1*) Finishing Menu 52