Lexmark C912 User's Reference - Page 91

Using printer menus Menu Item Print Timeout Printer Language Printer Usage Resource Save Purpose Values To specify the amount of time (in seconds) the printer waits before printing the last page of a print job that does not end with a command to print the page. The print timeout counter does not start until Waiting is displayed. Disabled 1...255 (90*) To establish the default printer language used to communicate data from the computer to the printer. Note: Setting a printer language as the default does not prevent a software program from sending print jobs that use the other language. PCL Emulation PS Emulation* To determine the behavior of the Max Speed image transfer unit during printing. Max Yield* To determine what the printer does Off* with downloaded resources, such as fonts and macros stored in RAM, if the printer receives a job that requires more memory than is available. On The printer does not print the last page of a print job until one of the following occurs: • The printer receives enough information to fill the page. • The printer receives a Form Feed command. • You select Print Buffer from the Job Menu. The printer prints the last page after the specified time. (Your printer may not support the entire range of values.) PCL emulation, compatible with Hewlett-Packard printers. PostScript emulation, compatible with Adobe PostScript language. The image transfer unit is engaged throughout the print job. The image transfer unit position is engaged based on page content. This may extend the life of certain print supplies. Printer retains downloaded resources only until memory is needed. It then deletes those resources associated with the inactive printer language. Printer retains all downloaded resources for all printer languages during language changes and printer resets. If the printer runs out of memory, 38 Memory Full is displayed. Setup Menu 86