Lexmark C912 User's Reference - Page 92

Using printer menus Menu Item Purpose Values Staple Alarm To specify how the printer Off responds when it is out of staples. Single* Continuous Toner Alarm To specify how the printer Off responds when it is low on toner. Single* Continuous Wait Timeout To specify the amount of time (in seconds) the printer waits to receive additional bytes of data from the computer. When this timeout expires, the print job is canceled. Wait Timeout is only available when you use PostScript emulation. This menu item has no effect on PCL emulation print jobs. Disabled 15...65535 (40*) Start Page The purpose of this page is to clean oil from the fuser and improve OHP quality when printed after a POR. The default for the setting is Off. =On =Off* Load Staples is displayed until someone loads staples. If an Auto Continue value is selected from the Setup Menu, the printer resumes printing after the specified timeout value. Printer stops printing, displays Load Staples, and sounds three quick beeps. Printer stops printing, displays Load Staples, and repeats three beeps every 10 seconds until the staple cartridge is replaced. An error message is displayed until someone replaces the toner cartridge. If an Auto Continue value is selected from the Setup Menu, the printer resumes printing after the specified timeout value. Printer stops printing, displays an error message, and sounds three quick beeps. Printer stops printing, displays an error message, and repeats three beeps every 10 seconds until the toner cartridge is replaced. Disables Wait Timeout. Specifies the amount of time the printer waits for additional data before it cancels the job. Setup Menu 87