Lexmark C912 User's Reference - Page 176
Did you replace Fuser?, SUPPLIES MENU, REPLACE SUPPLIES
View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Maintenance If the message Did you replace Fuser? or Did you replace Belt? appears, press Go. Otherwise, use the following steps to reset the fuser or transfer belt counter. Note: Although the fuser is shown, the same procedure is used to clear the transfer belt. 1 Press Menu until SUPPLIES MENU appears on the second line of the display. SUPPLIES MENU 1 Menu 2 Select 3 Return 4 Go 5 Stop 6 2 Press Select to open the SUPPLIES MENU. 3 Press Menu until REPLACE SUPPLIES appears on the second line of the display. SUPPLIES MENU REPLACE SUPPLIES 1 Menu 2 Select 3 Return 4 Go 5 Stop 6 4 Press Select to open Replace Supplies. Resetting the maintenance counter 171
Maintenance
If the message
Did you replace Fuser?
or
Did you replace Belt?
appears, press
Go
.
Otherwise, use the following steps to reset the fuser or transfer belt counter.
Note:
Although the fuser is shown, the same procedure is used to clear the transfer belt.
1
Press
Menu
until
SUPPLIES MENU
appears on the second line of the display.
SUPPLIES MENU
1
Menu
2
Select
3
Return
4
Go
5
Stop
6
2
Press
Select
to open the
SUPPLIES MENU
.
3
Press
Menu
until
REPLACE SUPPLIES
appears on the second line of the display.
SUPPLIES MENU
REPLACE SUPPLIES
1
Menu
2
Select
3
Return
4
Go
5
4
Press
Select
to open
Replace Supplies
.
Stop
6
Resetting the maintenance counter
171