Lexmark C912 User's Reference - Page 175
Resetting the maintenance counter, For instructions about replacing other supply items
View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Maintenance 6 Push the waste toner arm until it snaps into place over the photodeveloper. 7 Repeat steps 2 through 5 to install additional toner cartridges. CAUTION: Before closing the top cover make sure everyone is away from the printer and the area under the cover is free of hands, clothing, and other items. 8 Close the top cover and the front door. Note: If you need instructions on how to close the top cover, see Opening the top cover. For instructions about replacing other supply items, click one of the following headings: Replacing the fuser Replacing the transfer belt Resetting the maintenance counter After replacing the fuser or transfer belt, you must reset the maintenance counter. Resetting the maintenance counter 170
Maintenance
6
Push the waste toner arm until it
snaps
into place over the photodeveloper.
7
Repeat steps 2 through 5 to install additional toner cartridges.
CAUTION:
Before closing the top cover make sure everyone is away from the printer and the
area under the cover is free of hands, clothing, and other items.
8
Close the top cover and the front door.
Note:
If you need instructions on how to close the top cover, see
Opening the top cover
.
For instructions about replacing other supply items, click one of the following headings:
Replacing the fuser
Replacing the transfer belt
Resetting the maintenance counter
After replacing the fuser or transfer belt, you must reset the maintenance counter.
Resetting the maintenance counter
170