Lexmark C912 User's Reference - Page 162

Maintenance Preparing for maintenance 1 Turn the printer on. 2 Follow the instructions in the table for the message your printer is displaying. Primary message 80 Belt Life Warning Secondary message Select = Replace Go = Continue 80 Belt Exhausted 80 Fuser/Belt Life Warning Select = Replace Select = Replace Go = Continue 80 Fuser/Belt Exhausted Select = Replace What you should do Press Select if you want to replace the transfer belt now. Press Go if you want to wait to replace the transfer belt. Press Select to replace the transfer belt. Press Select if you want to replace the transfer belt now. Press Go if you want to wait to replace the transfer belt. Press Select to replace the transfer belt. The Preparing for Maintenance message appears while the printer moves parts into position. After the parts are in position, the message Printer Ready for Maintenance appears, followed by Power Off to Replace Items. 3 Turn the printer off. Removing the transfer belt 1 Complete the steps in Preparing for maintenance. 2 Make sure the printer is turned off. Replacing the transfer belt 157