Lexmark X264 Service Manual - Page 112
Sensor 1 test, Select, Starting Test, Sensor 1: Closed
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
7013-XXX Sensor 1 test This test verifies the functionality of scan sensor 1. To test this sensor, perform the following steps: 1. In the sensor test menu, press or to scroll to the Sensor1 test. 2. Press Select ( ). Starting Test displays. Sensor 1: Closed displays. 3. Lift the ADF top cover, and close the ADF cover sensor by pressing down on the ADF sensor actuator (A) with a small, flatblade screwdriver. A 4. Press the Sensor 1 actuator (B) located in the ADF paper path. Sensor 1: Open should display if the sensor is working properly. B 5. Press Back ( ) to exit the test and return to the Scanner sensor tests. 3-20 Service Manual
3-20
Service Manual
7013-
XXX
Sensor 1 test
This test verifies the functionality of scan sensor 1. To test this sensor, perform the following steps:
1.
In the sensor test menu, press
or
to scroll to the Sensor1 test.
2.
Press
Select
(
).
Starting Test
displays.
Sensor 1: Closed
displays.
3.
Lift the ADF top cover, and close the ADF cover sensor by pressing down on the ADF sensor actuator (A)
with a small, flatblade screwdriver.
4.
Press the Sensor 1 actuator (B) located in the ADF paper path.
Sensor 1: Open
should display if the
sensor is working properly.
5.
Press
Back
(
) to exit the test and return to the Scanner sensor tests.
A
B