Lexmark X264 Service Manual - Page 220
Wear strip (550-sheet tray 2) removal, end of the strip is fastened tightly.
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
7013-XXX Wear strip (550-sheet tray 2) removal 1. Use a spring hook to disconnect the strip from the top of the tray. 2. Life the strip, and remove. Note: When replacing the strip (for all trays): • Carefully insert the strip from the top of the tray, and push it down through the opening until it clicks into place. • Turn the tray over to view the bottom of the strip. Using the spring hook, check to make sure that the end of the strip is fastened tightly. • Be sure that the drafted edge of the strip is installed toward the bottom of the tray. 4-82 Service Manual
4-82
Service Manual
7013-XXX
Wear strip (550-sheet tray 2) removal
1.
Use a spring hook to disconnect the strip from the top of the tray.
2.
Life the strip, and remove.
Note:
When replacing the strip (for all trays):
•
Carefully insert the strip from the top of the tray, and push it down through the opening until it
clicks
into place.
•
Turn the tray over to view the bottom of the strip. Using the spring hook, check to make sure that the
end of the strip is fastened tightly.
•
Be sure that the drafted edge of the strip is installed toward the bottom of the tray.