Lexmark X264 Service Manual - Page 217
Transfer roll removal
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
7013-XXX Transfer roll removal Note: A flashlight may be useful to remove the transfer roll. 1. Open the front access door. 2. At the right side of the transfer roll, squeeze the holder arms (A) with the left hand while lifting. Stop when the holder is unlatched. 3. At the left side of the transfer roll, squeeze the holder arms with the right hand while lifting with the left hand. Stop when the left holder is unlatched. 4. With a hand at each end, lift the transfer roll out. Note: Do not try removing the spring on the left; it is not removable but can be dislodged. The spring included with the FRU is to be used only if the old right-side spring is damaged or lost. Both springs must be positioned on posts that cannot be seen. If the old springs are moved, then feel the base of the springs to assure that they are on the posts. The top of the springs must be captured in the bearings of the transfer roll. Repair information 4-79