Lexmark X264 Service Manual - Page 122

FB Edge Erase, Scanner Manual Registration, Scroll to the Print Quick Test menu item.

Get Lexmark X264 PDF manuals and user guides View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 122 highlights

7013-XXX FB Edge Erase This menu item sets the size, in millimeters, of the no print area around a flatbed scan job. Copy jobs will use the setting or two millimeters, whichever is larger. To adjust the flatbed edge erase setting, perform the following steps: 1. In the Configuration menu, select the FB Edge Erase menu item. 2. Use the or to increase or decrease the setting's value. 3. When the desired value is displayed, press . Scanner Manual Registration This item is used to manually register the flatbed and ADF on the MFP's scanner unit. Registration should be performed whenever the ADF unit, flatbed unit, or controller card are replaced. To manually register the ADF perform the following steps: 1. In the Configuration Menu, scroll to the Scanner Manual Registration menu item. 2. Press . 3. Scroll to the Print Quick Test Page menu item. 4. Press . 5. To view and adjust the simplex ADF registration, place the quick test page into the ADF, scroll to the Copy Quick Test Page item, and press . 6. After the quick test page copies, scroll to ADF and press . 7. Scroll to Horizontal Adjust, and press . 8. Use the or to increase or decrease the setting's value. Note: Each button press moves the margin values one pixel in the respective direction. 9. Press to accept the value. 10. Scroll to Top Edge, and press . 11. Use the or to increase or decrease the setting's value. Note: Pressing moves the margin up, and pressing moves the margin down. 12. Press to accept the value. To manually register a Duplex ADF, perform the following steps: 1. In the Configuration Menu, scroll to the Scanner Manual Registration menu item. 2. Press . 3. Scroll to the Print Quick Test Page menu item. 4. Press . 5. To view and adjust the duplex ADF front side registration, place the quick test page faceup into the ADF, scroll to the Copy Quick Test Page item, and press . 6. After the quick test page copies, scroll to ADF Frontside, and press . 7. Scroll to Horizontal Adjust, and press . 8. Use the or to increase or decrease the setting's value. Note: Each button press moves the margin values one pixel in the respective direction. 9. Press to accept the value. 10. Scroll to Top Edge, and press . 11. Use the or to increase or decrease the setting's value. Note: Pressing moves the margin up, and pressing moves the margin down. 12. Press to accept the value. 13. To view and adjust the duplex ADF backside registration, place the quick test page facedown up into the ADF, scroll to the Copy Quick Test Page item, and press . 14. After the quick test page copies, scroll to ADF Backside, and press . 15. Scroll to Horizontal Adjust, and press . 3-30 Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
3-30
Service Manual
7013-
XXX
FB Edge Erase
This menu item sets the size, in millimeters, of the no print area around a flatbed scan job. Copy jobs will use the
setting or two millimeters, whichever is larger.
To adjust the flatbed edge erase setting, perform the following steps:
1.
In the Configuration menu, select the FB Edge Erase menu item.
2.
Use the
or
to increase or decrease the setting’s value.
3.
When the desired value is displayed, press
.
Scanner Manual Registration
This item is used to manually register the flatbed and ADF on the MFP’s scanner unit. Registration should be
performed whenever the ADF unit, flatbed unit, or controller card are replaced.
To manually register the ADF perform the following steps:
1.
In the Configuration Menu, scroll to the Scanner Manual Registration menu item.
2.
Press
.
3.
Scroll to the Print Quick Test Page menu item.
4.
Press
.
5.
To view and adjust the simplex ADF registration, place the quick test page into the ADF, scroll to the Copy
Quick Test Page item, and press
.
6.
After the quick test page copies, scroll to ADF and press
.
7.
Scroll to Horizontal Adjust, and press
.
8.
Use the
or
to increase or decrease the setting’s value.
Note:
Each button press moves the margin values one pixel in the respective direction.
9.
Press
to accept the value.
10.
Scroll to Top Edge, and press
.
11.
Use the
or
to increase or decrease the setting’s value.
Note:
Pressing
moves the margin up, and pressing
moves the margin down.
12.
Press
to accept the value.
To manually register a Duplex ADF, perform the following steps:
1.
In the Configuration Menu, scroll to the Scanner Manual Registration menu item.
2.
Press
.
3.
Scroll to the Print Quick Test Page menu item.
4.
Press
.
5.
To view and adjust the duplex ADF front side registration, place the quick test page faceup into the ADF,
scroll to the Copy Quick Test Page item, and press
.
6.
After the quick test page copies, scroll to ADF Frontside, and press
.
7.
Scroll to Horizontal Adjust, and press
.
8.
Use the
or
to increase or decrease the setting’s value.
Note:
Each button press moves the margin values one pixel in the respective direction.
9.
Press
to accept the value.
10.
Scroll to Top Edge, and press
.
11.
Use the
or
to increase or decrease the setting’s value.
Note:
Pressing
moves the margin up, and pressing
moves the margin down.
12.
Press
to accept the value.
13.
To view and adjust the duplex ADF backside registration, place the quick test page facedown up into the
ADF, scroll to the Copy Quick Test Page item, and press
.
14.
After the quick test page copies, scroll to ADF Backside, and press
.
15.
Scroll to Horizontal Adjust, and press
.