Lexmark X264 Service Manual - Page 189
Media feed clutch removal, Left side printer cover removal
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
7013-XXX Media feed clutch removal 1. Remove theleft cover. See "Left side printer cover removal" on page 4-33. 2. Remove the main motor gear drive. See "Main motor gear drive removal" on page 4-42. 3. Carefully remove the e-clipthat secures the clutch to the ACM shaft. 4. Pull up the clutch from the cavity, exposingthe white tape. 5. Cut the tape to expose the wire connectionto the clutch, and cut the cables at the copper leads. 6. Clean any adhesive residue from the wires. Repair information 4-51
Repair information
4-51
7013-XXX
Media feed clutch removal
1.
Remove theleft cover. See
“Left side printer cover removal” on page 4-33
.
2.
Remove the
main motor gear drive. See
“Main motor gear drive removal” on page 4-42
.
3.
Carefully remove the e-clipthat secures the clutch to the ACM shaft.
4.
Pull up the clutch from the cavity, exposingthe white tape.
5.
Cut the tape to expose the wire connectionto the clutch, and cut the cables at the copper leads.
6.
Clean any adhesive residue from the wires.