Lexmark X264 Service Manual - Page 41
User status and attendance messages continued, Select, User primary message, Explanation
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
7013-XXX User status and attendance messages (continued) User primary message Explanation Load Manual Printer does not detect media meeting the description in the single sheet feeder (manual feeder). The following actions can be taken: • Load paper and the job continues. • Press Select ( ), and choose an alternate source for media. • Cancel the current job. Load Manual Printer does not detect media meeting the description in the single sheet feeder (manual feeder). The following actions can be taken: • Load paper and the job continues. • Press Select ( ), and choose an alternate source for media. • Cancel the current job. Load Manual Printer does not detect media meeting the description and in the single sheet feeder (manual feeder). The following actions can be taken: • Load paper and the job continues. • Press Select ( ), and choose an alternate source for media. • Cancel the current job. PJL OP Message PJL Seed Message PJL ST Message Try one or more of the following: • Press Select ( ) to clear the message, and continue printing. • Wait for the message to clear. Remove Paper ADF This posts when there is paper detected in the ADF upon POR or when the cover is closed (or any other situation that re-inits the scanner). Message clears when paper is removed. Remove Paper Standard Bin The standard output bin is full or nearly full. Remove the media from the bin. Unsupported USB Remove the unrecognized device from the USB port on the front of the printer. Device, Please Remove Unsupported USB Hub, please remove 34 Short Paper Remove the unrecognized USB hub/device from the USB port on the front of the printer. • Press Select ( ) to clear the message and continue printing. The printer does not automatically reprint the page that prompted the message. • Check tray length and width guides to ensure paper is properly fitted in the tray. • Make sure the print job is requesting the correct size of paper. • Adjust the Paper Size setting for the size paper you are using. If MP Feeder Size is set to Universal, make sure the paper is large enough for the formatted data. • Cancel the current job. Diagnostics information 2-7