Lexmark X264 Service Manual - Page 40
Messages and error codes, User attendance messages
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
7013-XXX Messages and error codes User attendance messages The printer control panel displays messages describing the current state of the printer and indicates possible printer problems that must be resolved. This topic provides a list of all printer messages, explains what they mean, and tells how to clear the messages. The following table lists the messages in alphanumerical order. A message can also be located using the index. User status and attendance messages User primary message Explanation Close Door No Analog Phone Line Message clears when upper and lower doors are closed. An analog line is not detected as being plugged into the modem. If the device is in Analog mode, this has a source of Fax. If the device is in Fax Server mode, and the 'Enable analog receive' Fax Server setting is set to 'On', this has a source of Fax Receive. If the device is in Fax Server mode and the 'Enable analog receive' Fax Server setting is set to 'Off', then this IR is not generated. Memory Full, cannot send faxes After a start, there is no memory to do the fax job. Attempted fax is canceled. Fax Station Name not set up Fax Station number not set up. Insert Duplex Page in Tray Reload printed page in tray . Cancel Job appears if the job can be canceled. Install Tray or Cancel Printer detects that tray is missing, where x is 1 or 2. This message appears if job the job was begun, but the paper has not yet been retrieved. The tray is no longer detected. Replace the indicated tray. Load , where is Tray 1, Tray 2, Multi-Page Feeder (MP feeder), or Envelope Feeder. • Load the input source with the correct type and size media. • Cancel the current job. Load Printer does not detect media meeting the description in , where is Tray 1 or Tray 2. • Load the input source with the correct type and size media. • Cancel the current job. Load Printer does not detect media meeting the size requested in the source indicated. • Load the input source with the correct type and size media. • Cancel the current job. Load Printer does not detect media meeting the size or type requested in the source indicated. • Load the input source with the correct type and size media. • Cancel the current job. Load Manual Printer does not detect media meeting the description in the single sheet feeder (manual feeder). The following actions can be taken: • Load paper, and the job continues. • Press Select ( ), and choose an alternate source for media. • Cancel the current job. 2-6 Service Manual