Nokia N80 Internet Edition Nokia N80ie User Guide in English - Page 98
Connection, Data connections and access points
View all Nokia N80 Internet Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Tools Call waiting-If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on (Activate) or off (Cancel), or check whether the function is activated (Check status). Reject call with SMS-Select Yes to send a text message to a caller informing why you could not answer the call. See 'Answer or decline a call', p. 65. Message text-Write a text to be sent in a text message when you decline a call. Image in video call-If video is not sent during a video call, you can select a still image to be displayed instead. Automatic redial-Select On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press . Summary after call-Activate this setting if you want the device to briefly display the approximate duration of the last call. 1-touch dialing-Select On, and the numbers assigned to the 1-touch dialing keys ( - ) can be dialed by pressing and holding the key. See also '1-touch dial a phone number', p. 61. Anykey answer-Select On, and you can answer an incoming call by briefly pressing any keypad key, except , , , and . Line in use-This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Tip! To switch between the phone lines, press and hold in the standby mode. Line change-To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code. Connection Data connections and access points Your device supports packet data connections (network service), such as GPRS in the GSM network. When you use your device in GSM and UMTS networks, multiple data connections can be active at the same time, and access 97