Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 102
Channel, Encryption, MAC Address, Filtering, Setting
View all Panasonic BL-WV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
6 Setup Menu Setting Channel Encryption Encryption Key MAC Address Filtering Description The communications channel to be used can be chosen from either AUTO or a number between 1 and 11. Choosing AUTO will allow the BL-WV10A to automatically detect an available channel at launch. If the quality of the connection is not, you can manually choose another channel as well. Choose to turn encryption either on or off. Sets an encryption key when encryption is turned on. Sets an encryption key when encryption is turned on. Up to 4 encryption keys can be set in advance. Allowable keys: Choose from encryption keys 1 through 4 to use with encryption. Key types: The types of encryption keys are 64 bit (10 hexadecimal digits or 5 letters), 128 bit (26 hexadecimal digits or 13 letters), or 152 bit (32 hexadecimal digits or 16 letters). The level of security increases with the number of bits, but there may be a slight decrease in network speed as a result. Keys 1 through 4: Enter an encryption key that corresponds in length to the type selected. Choose to either turn MAC address filtering (to specify the addresses of connected devices) on or off. Turning it on will allow you to specify the MAC addresses of the devices which are allowed to connect. Up to 16 address can be specified. Note • Use the same encryption key number and type for any wireless terminal to be connected. Note • To register a BL-C30A, you will need to specify 2 MAC addresses. Choose the MAC address indicated on the base of the BL-C30A and one from the following table based on the last digit in the BL-C30A's MAC address. 0 -> 1 2 -> 3 4 -> 5 6 -> 7 8 -> 9 A -> B C -> D E -> F For example, if the MAC address for the BL-C30A is 00:80:F0:54:C0:C4, you should specify 00:80:F0:54:C0:C4 and 00:80:F0:54:C0:C5. Certain changes may require the BL-WV10A to restart. 102