Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 22

2 Connecting Cameras 2.1 Local and Remote Cameras Cameras accessed by the BL-WV10A are referred to as either "local" or "remote" cameras, based on the way in which they are configured. Local cameras allow you to not only monitor images, but can be used in conjunction with the various features of the BL-WV10A. Remote cameras, such as cameras accessed over the Internet, can be monitored, but certain BL-WV10A features may not be available with remote cameras. INTERNET Remote Camera Cameras connected via an Internet connection Router BL-WV10A User Name: AAAAAA Password: BBBBBB User Name: WWWWWW Password: XXXXXX Local Camera Camera's User Name and Password is the same as the BL-WV10A's Admin. User Name and Admin. Password Remote Camera Camera's User Name and Password is different from the BL-WV10A's Admin. User Name and Admin. Password Admin. User Name: AAAAAA Admin. Password: BBBBBB Local Area Network (LAN) Local Camera Cameras configured using the BL-WV10A's Quick Setup utility (some exceptions apply) Note • • • If the firmware version of a BL-C10A or BL-C30A is older than 1.22, [This camera's firmware is out of date] will be displayed and the camera will be registered as a remote camera. HCM series cameras with firmware older than version 1.08, as well as zoom cameras, can be registered as remote cameras only. User names and passwords shown here are examples only. 22