Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 60

3 Viewing Camera Images Registering the Home Position/Sensor Position 1. Using the navigator keys, pan and tilt the lens and aim it at the desired home position. 2. To register the current position as the home position, hold the [ENTER] for about 5 seconds. Press and hold [9] to register the current position as the sensor position. • A confirmation screen will appear. Home Position Confirmation Screen Sensor Position Confirmation Screen 3. Select [Yes] and press [ENTER] to confirm. Note • • • Use of the home and sensor positions stores data to the camera. When multiple users are using the cameras, only the data for the last registration will remain valid; other users can overwrite registered positions. You cannot set a camera so that its lens does not move to the sensor position when the camera's sensor is activated. Registering the home position and/or sensor position will also register the brightness and white balance settings (see page 124) at the time of the registration. Registering the Preset Keys The camera's display positions can be registered to correspond to numbers of the remote control keypad. 1. Using the navigator keys, pan and tilt the lens and aim it at the position you would like to register to a preset key. 2. Hold the desired preset key number key ([1] to [8]) for roughly 5 seconds. • A confirmation screen will appear. • The currently set name for the preset will appear. 60