Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 151
Issue, Causes and Solutions, For the BL-C10A and BL-C30A, the firmware
View all Panasonic BL-WV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
16.6 Quick Setup Issue The camera cannot be set as a local camera. 16 Troubleshooting the BL-WV10A Causes and Solutions Are you attempting to perform Quick Setup on a camera already configured using a computer? • To use Quick Setup to set cameras already configured on a computer as local cameras, you need to set the administrator name and password in Basic Settings to have the same values as those of the camera you wish to perform Quick Setup on. Is the firmware version of the camera out of date? • For the BL-C10A and BL-C30A, the firmware version must be 1.22 or higher. • For HCM series cameras, the firmware version must be 1.08 or higher. Does the camera support local camera registration? • Cameras with a zoom feature cannot be registered as local cameras. Cameras that have been registered as remote cameras cannot be re-registered as local cameras even after re-initializing. • In the Camera Setup screen in normal mode, erase the camera, then re-initialize it, and then perform Quick Setup. When performing Quick Setup on cameras when 2 BL-WV10As are in use, those for one of the BLWV10As will be registered as local cameras, but those for the other BL-WV10A will be registered as remote cameras. • First, make sure that the administrator name and password for the cameras is identical on both BL-WV10As. Next, connect the cameras to each BL-WV10A prior to connecting the BL-WV10As to each other. [For assistance, please call: 1-800-272-7033] 151