Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 141

15 Error Messages Standard Operation Mode Error Messages Error Message Incorrect security code. Cannot connect to camera. Cannot communicate with the camera. Settings could not be saved. Enter a name for the Preset. Causes and Solutions This error is displayed if the security code entered to enter the [General Setup] or [Camera Setup] screens in incorrect. • Enter the correct security code. If you've forgotten it, press the FACTORY DEFAULT RESET button to reset the device and reregister the camera using Quick Setup. This error is displayed when the camera cannot be accessed. • Check the camera's power and connections and its IP address as displayed in the Camera Settings. • If using wireless cameras, refer to the wireless communications information on page 6. This error is displayed when the camera cannot be accessed. • Check the camera's power and connections and its IP address as displayed in the Camera Settings. • If using wireless cameras, refer to the wireless communications information on page 6. This error is displayed if a camera's access is lost when changing local camera settings. • Check the camera's power and connections and its IP address as displayed in the Camera Settings. This error can also be displayed if unusable characters were used to register a camera name for preset registration or local camera settings. • Register using appropriate characters. This error appears if, during preset registration, the registered name field is left blank. • Enter a preset registered name. [For assistance, please call: 1-800-272-7033] 141