Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 29
Sunday in October., If a camera image does not appear, check the connection and then restart
View all Panasonic BL-WV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2 Connecting Cameras 2. Set the mode switch on the back of the BL-WV10A to [NORMAL] and turn it on. • After the startup screen, the camera monitoring screen will appear. Note • • As the cameras start up, those registered in camera list 1 will display a monitoring image. If multiple cameras were registered, confirm that monitoring images for all of the cameras registered in the multi-camera screen (see page 64) are displayed. If the BL-WV10A does not receive date and time information from any of the connected cameras, the [Date and Time] screen will appear. Select the current date and time using the navigator keys on the remote control, and press [ENTER] when finished. • If [DST] is turned on, the BL-WV10A will automatically adjust its clock for Daylight Saving Time. The clock will move forward 1 hour at 2:00 AM on the first Sunday in April, and will move back 1 hour at 3:00 AM on the last Sunday in October. • If a camera image does not appear, check the connection and then restart the camera. If the image still fails to appear, reset the camera to its default values, and re-register it using Quick Setup. • The date and time is displayed in the upper-right corner of the BLWV10A's menu. If the date and time setting is not correct, set the correct date and time from the [Date and Time] screen on the [Settings] screen (see page 96). Current date and time [For assistance, please call: 1-800-272-7033] 29