Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 133
Confirm the camera images., and then turn it back on again.
View all Panasonic BL-WV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
10 Adding Cameras • When registration is complete, the buzzer will sound and the wireless indicator will flash once for each of the cameras registered. When camera registration is complete, [Finished] is displayed. • The Quick Setup screen will appear differently based on the network on which it is used. • The camera can also be registered manually (see page 105). However, any additional cameras will be registered as remote cameras. Note • To add more cameras, connect the Ethernet cable to the camera to be added, and re-perform step 2. 3. Once all of the cameras have been registered as in step 2, set the mode switch on the back on the BL-WV10A to [NORMAL], turn the BL-WV10A off and then turn it back on again. 4. Confirm the camera images. • Place the cameras after confirming that they display images correctly. [For assistance, please call: 1-800-272-7033] 133