Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 48
may take longer as a result. A camera restart can take up to 2 minutes., During Quick Setup
View all Panasonic BL-WV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2 Connecting Cameras 1. Connect the cameras using the Ethernet cables provided with them to any of the LAN jacks on the on the BL-WV10A. 2. Turn on the cameras. • Quick Setup will begin for the camera. Rear panel of LAN jacks BL-WV10A Switch Ethernet cable Bottom of BL-C30A To configure a BLC30A wireless camera Rear of camera using the Quick Setup utility, set the switch on the bottom of the camera to [WIRED] Ethernet cable Router Note • • During camera registration, the camera may be restarted, and registration may take longer as a result. A camera restart can take up to 2 minutes. During Quick Setup, the wireless indicator will be green. 48
2
Connecting Cameras
48
1.
Connect the cameras using the Ethernet cables provided with them to any of
the LAN jacks on the on the BL-WV10A.
2.
Turn on the cameras.
•
Quick Setup will begin for the camera.
Note
•
During camera registration, the camera may be restarted, and registration
may take longer as a result. A camera restart can take up to 2 minutes.
•
During Quick Setup, the wireless indicator will be green.
Ethernet cable
LAN jacks
Rear of camera
Rear panel of
BL-WV10A
Switch
Bottom of BL-C30A
To configure a BL-
C30A wireless camera
using the Quick Setup
utility, set the switch on
the bottom of the
camera to [WIRED]
Ethernet cable
Router