Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 99
Network Settings, IP Address
View all Panasonic BL-WV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
6 Setup Menu Note • If you forget the security code, you will be unable to enter the Setup screen, and you will need to reset the BL-WV10A. Doing so, however, will reset all of your settings to their defaults, and sever the connections to the cameras. If necessary, write down the security code and store it in a secure place. • The security code must be 4 digits in length. • If you forget the security code, push the FACTORY DEFAULT RESET button to restore the BL-WV10A's default settings (see page 131). You will need to reperform Quick Setup to register the cameras and set desired settings again. • Setting the volume to off will turn off both the buzzer and any operational sounds. • To turn off the volume for the buzzer in Sensor Alert mode only, press [ALERT]. Network Settings Change the settings for the BL-WV10A's network information. Setting IP Address/ Subnet Mask Gateway DNS1/DNS2 Proxy Server/ Proxy Port Description Set the IP address and subnet mask for the BL-WV10A. Set the gateway address Set the IP address for the DNS server. Up to 2 DNS server addresses can be set. If you will use a proxy server to view camera images, enter its name and port number here. Note • If the BL-WV10A will not be connected to a network (the BL-WV10A will only be connected to cameras), these settings can be ignored. [For assistance, please call: 1-800-272-7033] 99