Panasonic BL-WV10A BL-MS103A Owner's Manual (English) - Page 30
PLACING CAMERAS, strength displayed on-screen for optimum transmission quality.
View all Panasonic BL-WV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
2 Connecting Cameras 2.2.5 Placing Cameras Place cameras after confirming the camera image (see page 28). 1. Disconnect the cameras and place them where you wish to use them. • Refer to page 6 in this manual as well as the Operating Instructions included with the camera for proper placement. 2. Connect all wired cameras to the BL-WV10A. 3. Set the mode switch on the back of the BL-WV10A to [NORMAL] and turn it on. 4. Turn on the cameras. 5. Confirm that each camera can be accessed by the BL-WV10A. • Camera information can be displayed by pressing [DISPLAY] while monitoring a camera. When placing a wireless camera, refer to the signal strength displayed on-screen for optimum transmission quality. Transmission problems can result in connection faults and problems when monitoring the camera. Signal strength Strongest signal Weakest signal No signal 30