Panasonic CFU1AQCXZ2M Reference Manual - Page 106
Wireless Communication (only for model with wireless LAN/Bluetooth/wireless WAN)
UPC - 092281896410
View all Panasonic CFU1AQCXZ2M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Troubleshooting (Advanced) 106 Wireless Communication (only for model with wireless LAN/Bluetooth/wireless WAN) Cannot connect to a network. Access point is not detected. z Slide the wireless switch to turn on the wireless devices. z Set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled] in the [Advanced] - [Wireless Configuration] menu of the Setup Utility (Î page 90). z Restart the computer. z Shorten the distance between the computer and the access point, and try the detection again. z Confirm the following settings: • [Wireless LAN] in the [Advanced] - [Wireless Configuration] menu of the Setup Utility Confirm that [Wireless LAN] is set to [Enabled]. (Î page 90) • Wireless Switch Slide the wireless switch to ON. • Wireless Switch Utility Confirm that Wireless LAN is ON.(Î page 80) z This computer uses channels 1 through 11*3 when using IEEE802.11b/g. Check the channel being used by the access point. *3 In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications can be conducted on each band segment. A "Channel" refers to the individual frequency bandwidth divisions. Connecting Peripherals An error occurs while installing the driver. z When you install a driver of card or peripheral device, make sure that the driver is compatible with the operating system. If it is not compatible, malfunction may occur. For information about the driver, contact the manufacturer of the peripheral device.