Panasonic CFU1AQCXZ2M Reference Manual - Page 84
Settings in Device Manager, Settings in Wireless Switch Utility, When 802.11a is enabled
UPC - 092281896410
View all Panasonic CFU1AQCXZ2M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Wireless LAN 84 z A standard user needs to enter an administrator password. NOTE z In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law. z The Wireless Switch Utility icon ( or ) indicates the on/off status of wireless LAN and/or Bluetooth and/or wireless WAN, not the setting of IEEE802.11a. z If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connection will be temporarily interrupted. z You can also change the IEEE802.11a setting in [Device Manager]. A Click (Start) - [Computer] - [System properties] - [Device Manager]. z A standard user needs to enter an administrator password. B Double-click [Network adapters] and double-click the wireless network adaptor used. C Click [Advanced], and then select [Wireless Mode Selection] in [Property]. D Select the settings in [Value]. E Click [OK]. If you enable or disable 802.11a using the pop-up menu of Wireless Switch Utility, the setting in [Device Manager] will be accordingly changed as below. Settings in Device Manager [6. 802.11a/b/g] [4. 802.11b/g] [3. 802.11g] [5. 802.11a/g] [1. 802.11a] [2. 802.11b] Settings in Wireless Switch Utility When 802.11a is enabled When 802.11a is disabled a+b+g+n is enabled b+g+n is enabled a+g+n is enabled g+n is enabled a+n is enabled b is enabled Settings in Device Manager [2 GHz Only] [5 GHz Only] [Auto] Settings in Wireless Switch Utility When 802.11a is enabled When 802.11a is disabled a+b+g+n is enabled a+n is enabled b+g+n is enabled a+b+g+n is enabled