Panasonic CS-E18SD3UAW service manual - Page 42
Wire Stripping and Connecting Requirement
View all Panasonic CS-E18SD3UAW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
11.1.6.1 Wire Stripping and Connecting Requirement Wire stripping No loose strand when inserted 13/32" ± 1/32" 10 ± 1 mm Indoor/outdoor connection terminal board 7/32" (5 mm) or more (gap between wires) Conductor Conductor Conductor not fully inserted over inserted fully inserted ACCEPT PROHIBITED PROHIBITED Do not joint wires WARNING RISK OF FIRE JOINING OF WIRES MAY CAUSE OVERHEATING AND FIRE. OR OR OR Use complete wire without joining. Use approved socket and plug with earth pin. Wire connection in this area must follow to national wiring rules. 42
42
11.1.6.1
Wire Stripping and Connecting Requirement
Conductor
over inserted
Conductor
fully inserted
Conductor not
fully inserted
7/32" (5 mm)
or more
Indoor/outdoor
connection
terminal board
(gap between wires)
ACCEPT
PROHIBITED
PROHIBITED
Wire stripping
No loose strand when inserted
13/32" ± 1/32"
10 ± 1 mm
WARNING
RISK OF FIRE
JOINING OF WIRES MAY CAUSE
OVERHEATING AND FIRE.
OR
OR
OR
Use complete wire without joining.
Use approved socket and plug with earth pin.
Wire connection in this area must follow to national wiring rules.
Do not joint wires