Panasonic CS-E18SD3UAW service manual - Page 53
Electric Heater Control 1
![]() |
View all Panasonic CS-E18SD3UAW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
12.7 Electric Heater Control 1 Starting condition A) When all condition (1+2+3+4+5+6+7) are fulfilled. 1 Operation ON 2 Indoor Heating mode 3 Thermostat ON 4 Temperature different control (°F) Temp difference (Remote controller setting - Intake air temperature) When air conditioning is switched ON Heater ON 7.2 Heater OFF 1.8 ON by Temp difference ≥ 7.2°F OFF by Temp difference 1.8°F 5 Intake air temperature control Example: 1 When air conditioning is switch ON, Remote controller setting = 82.4°F Intake air temperature = 78.8°F Temp difference = 82.4-78.8 = 3.6°F Heater ON 2 After a while when Remote controller setting =82.4°F Intake air temperature = 80.6°F Temp difference = 82.4-80.6 =1.8°F Heater OFF 3 After a while when Temp difference ≥ 7.2°F Heater ON Intake air temperature [°F] 84.2 78.8 Heater OFF Heater ON When air conditioning is switched ON 6 Evaporator pipe sensor control Evaporator pipe sensor [°F] Heater OFF 140 ( β ) Heater ON 132.8 ( α ) When air conditioning is switched ON 7 Indoor Fan speed ≥ Lo Fan Control content 1 Electric heater will be switch ON when all condition for starting condition fulfilled. 2 Once Electric heater switched ON, It will operate at least 3 minutes. 53
![](/manual_guide/products/panasonic-e9sd3ua-service-manual-80b38e9/53.png)