Panasonic KX-TA82483 Programming Guide - Page 101

6.2 Disconnect The parameters are as follows: Parameter Dial Number Dial Type Comment Port Baud Rate (bps) Flow Control Modem Initialize Initialize Values Explanation 0-9 hyphen) and "," (comma) Telephone number to be dialed to access the PBX. Auto (Tone), Auto (Pulse), Manual Outgoing dialing method. If "Manual" is selected, a telephone must be connected in parallel to dial. - Enter a comment to help to identify this profile. COMx Specify the number of the COM port assigned to the PC's modem interface. Only available COM ports will be displayed. 1200, 2400, 4800, 9600, Specify the speed of data transmission. 19200, 38400, 57600, 115200 None, Hardware Specify whether the rate of data transfer is managed by hardware or not. Default, Custom Specifies the command used to initialize the modem. If "Custom" is selected, enter the initialize string in the text box. Refer to your modem's instruction manual for more details. - Click to send the specified initialize string to the modem. 6.2 Disconnect Disconnects the PC from the PBX. Data transmission ends, and Maintenance Console returns to Initial mode. To disconnect • From the Connect menu, select Disconnect. If there is data that has been edited but not yet sent to the PBX, a confirmation window will be displayed. • Click Yes to send the data to the PBX. • Click No to discard the data. Programming Manual 101