Panasonic KX-TA82483 Programming Guide - Page 76

2.2 PT Programming-Procedures [913] Call Waiting Caller ID Assignment Enables the Call Waiting Caller ID feature for each outside (CO) line that has had Caller ID Service contracted from the telephone company. 9 1 3 NEXT NEXT or PREV To continue CO line no. (1...8/ ) SELECT STORE END ( Enable/ Disable) To continue SELECT Conditions • When the Caller ID feature is disabled in [900] Caller ID, the Call Waiting Caller ID feature does not function even if it is enabled here. Programming Manual References [900] Caller ID Feature Manual References 1.1.28 Call Waiting Caller ID [914] Call Waiting Caller ID CAS Receive Time Selects the allowable CAS (CPE [Customer Premise Equipment] Alerting Signal) duration. Normally, it should not be necessary to change the default setting. If the extension user has a Call Waiting Caller ID during a conversation, the telephone company will send an alert tone (CAS) to the PBX. If the CAS duration is too long or too short, the CAS is ignored by the PBX. If the CAS is accepted, then the PBX will respond and the Call Waiting Caller ID feature will be performed. 9 1 4 NEXT SELECT STORE END (Mode 1: 40-120 ms/ Mode 2: 64-96 ms Mode 3: 72-96 ms) Conditions • This program is available when the Caller ID and Call Waiting Caller ID features are enabled in [900] Caller ID and [913] Call Waiting Caller ID Assignment. Programming Manual References [900] Caller ID [913] Call Waiting Caller ID Assignment Feature Manual References 1.1.28 Call Waiting Caller ID 76 Programming Manual