Panasonic KX-TA82483 Programming Guide - Page 89

4.1 Software Modes Parameter Word Length Stop Bit Parity Bit Values 8 bits 1 bit None Explanation Displays the number of bits in a word. This value cannot be changed. Displays the length of the stop, used to identify the end of a transmitted group of bits. This value cannot be changed. Displays the kind of parity error-checking used. This value cannot be changed. When connecting the KX-TA Maintenance Console to the PBX using an RS-232C cable, assign the following values to the Serial Interface (RS-232C) port of the PBX: Baud Rate (bps): 9600 Word Length: 8 bits Parity Bit: None Stop Bit: 1 bit Connection parameters for Modem Parameter Dial Number Dial Type Comment Port Baud Rate (bps) Flow Control Modem Initialize Initialize Values Explanation 0-9 hyphen) and "," (comma) Telephone number to be dialed to access the PBX. Auto (Tone), Auto (Pulse), Manual Outgoing dialing method. If "Manual" is selected, a telephone must be connected in parallel to dial. - Enter a comment to help to identify this profile. COMx Specify the number of the COM port assigned to the PC's modem interface. Only available COM ports will be displayed. 1200, 2400, 4800, 9600, Specify the speed of data transmission. 19200, 38400, 57600, 115200 None, Hardware Specify whether the rate of data transfer is managed by hardware or not. Default, Custom Specifies the command used to initialize the modem. If "Custom" is selected, enter the initialize string in the text box. Refer to your modem's instruction manual for more details. - Click to send the specified initialize string to the modem. Programming Manual 89