Panasonic KX-TA82483 Programming Guide - Page 187

9.3 CO [3] CPC Signal Detection-Outgoing Enables the PBX to detect a CPC signal from outgoing outside (CO) line calls. If disabled, CPC signal detection is only activated during an incoming outside (CO) line call. Default All outside (CO) lines: Off Value Range On (checked), Off (unchecked) Programming Manual References [421] CPC Signal Detection-Outgoing Feature Manual References 1.1.31 Calling Party Control (CPC) Signal Detection Disconnect Time Selects the length of the disconnect signal sent from the PBX to the telephone company or host PBX. The time you select must be longer than the requirements of your telephone company or host PBX. Default All outside (CO) lines: 1.5 s Value Range 0.5 s, 1.5 s, 4.0 s Programming Manual References [422] Disconnect Time Feature Manual References 1.1.60 Flash/Recall Ring Tone Pattern Selects the ring tone pattern for incoming outside (CO) line calls. It is recommended that you set a different ring tone pattern from the ring tone patterns specified in Extension-Ring Tone Pattern on the 9.1.11 Detail [1-10] screen and Doorphone Ring Tone Pattern-Door 1-4 on the 9.7.2 Others [7-2] screen. Default All outside (CO) lines: Single Value Range Single, Double, Triple Programming Manual References [423] CO Line Ring Tone Pattern 9.1.11 Detail [1-10]-Extension-Ring Tone Pattern Programming Manual 187