Panasonic UF-4500 Operating Instructions - Page 29

Installing Your Machine User Parameters Setting Your ID Number (Fax Telephone Number) If the remote machine does not have a Character ID but has an ID Number, when sending or receiving, your ID Number will appear on the remote machine's display and their ID Number will appear on your display. We suggest you use your facsimile telephone number as your ID number. (Up to 20 digits) 1 7 SET MODE (1-8) ENTER NO. OR ∨∧ 21 USER PARAMETERS? PRESS SET 3 KEY OPERATOR ID ENTER ID= 4 Enter the Key Operator Password. 5 KEY OPERATOR ID ENTER ID=****** FAX TEL NO repeatedly until display shows; 6 Enter your ID (up to 20 digits) by using the keypad and press the Abbr Dial/Space key to enter a space between numbers. Ex: 2 0 1 Abbr Dial/Space 5 5 5 Abbr Dial/Space 1 2 1 2 If you made a mistake, use or to move the cursor one space beyond the incorrect number, press Clear and then re-enter the new number. If more than 16 characters are entered, the left side characters will scroll off the display. 7 FAX TEL NO 201 555 1212 NOTE 1. You may use to enter a "+" character at the beginning of the ID number to indicate the following digit(s) for your country code. Ex:+1 XXX XXX XXXX+1 for U.S.A. country code. +81 X XXX XXXX +81 for Japan country code. 2. Your Fax Telephone Number must be set as your ID Number because it is required by the Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this Operating Instructions) 29